Toilet Swirls but Won’t Flush – Causes & Fixes  

“My Toilet Won’t Flush! – Causes & Fixes

 Discover the common causes and fixes for this annoying toilet problem

When a toilet swirls, it means that the water is not flowing properly. But what exactly causes a toilet to swirl? What can you do to fix it? In this post, we’ll talk about the causes of toilet swirls and how to fix them.

 I am going to discuss Toilet Swirls but Won’t Flush – Causes & Fixes

Toilet Swirls but Won’t Flush – Causes & Fixes

Why your Toilet only Swirls but won’t Flush

Low water levels in the toilet tank

Clogged drainpipe

Clogged inlet valves

Poor toilet location

Poorly-sized pipes

Poor venting

Malfunctioning flapper

Toilet Swirls but Won’t Flush – Causes & Fixes

It can be frustrating to try and flush your toilet only to have the water swirl around and not actually go down the drain. This can be caused by a number of factors including clogged pipes, bad connections, broken/leaking faucets, etc. It can also be an indication that the toilet is old and in need of replacement. If you are experiencing this problem, it’s important to contact a plumber as soon as possible.

If this is your problem, there are many causes to it including less water than is needed for a proper flush, a clog in the inlet valves, a clog in the P valve, poor toilet location, clogged vents, poor venting, poor pipe sizes, and many other reasons. The solutions to this issue include adjusting the water level in the toilet tank, unclogging vents and pipes, and changing the location of your toilet among others.

When it comes to projects, it all depends on the issue at hand. Some causes need more skills and costs to fix than others. I have had clients who have needed to do very complex things such as a custom-built home, while others have just needed to change out a light fixture or replace some carpeting.

Why your Toilet only Swirls but won’t Flush

If you want to know what causes a toilet to swirl but not flush, you need to understand how a toilet works in the first place. It’s actually a simple setup where water is stored in a tank above the toilet seat. This tank has a certain capacity that is supposed to be enough to completely wash away the wastes each time it’s flushed.

There are a number of different types of toilets. Some have a tank, while others don’t. Some have a lever and others use a sprayer. Regardless of the type of toilet you have, the way that the water is flushed is the same.

The weight of the water in the toilet bowl will force the water past the P-valve, causing the water to flow into the drain. This is why if you have a slow leak in your toilet, the water will be flowing slowly.

In the current case, the toilet will swirl with water but won’t be enough to flush the toilet. The most probable causes for this scenario and their solutions include the following: The tank is empty. You need to fill the tank with water before flushing. The water is not hot enough. Increase the temperature of the water to 120°F. There is a leak in the pipe. The toilet is clogged. The toilet is broken.

Low water levels in the toilet tank

A low water level in the toilet tank can be caused by the user failing to drain the tank after flushing. The easiest way to check this is to pull up the handle of the tank and look at the water level. If it is less than half full, it’s likely that the tank needs to be drained. Another cause could be a clogged drain or faulty plumbing. It’s important to have your toilet tank checked regularly by a plumber.

When we flush the toilet, we don’t always get the right amount of water in the tank. To get the right amount, we need to get the right amount of water in the tank, which means we need to set the float ball at the right level.

You may have heard that if you keep the water level in your toilet tank too low, it can cause problems. This is true, but you can adjust the water level to solve your problem.

Clogged drainpipe

I’m sorry you’ve had a clogged drainpipe! That’s a bit of a nuisance, and something that you should not have to deal with. If you need help unclogging your drainpipe, then you should get in touch with a plumber. It may be that the clog is in the form of hair or even food. In this case, you will need to remove the clog by using a plunger or some other tool.

If the drainpipe has been blocked for a while, you will need to get a professional to unblock the drainpipe. If you have tried all the methods above and the clog still remains, then you might need a plumber to unblock the drainpipe.

The drainpipe is the most important part of your bathroom because it is where water drains from your house or apartment. This is especially important if you live in an area that has heavy rainfall. The main purpose of the drainpipe is to carry away the water that enters your house or apartment from the outside. In order to do this properly, you will need to install a good drainage system that ensures that the drainpipe doesn’t become blocked. There are many things that can block a drainpipe, and you need to know how to prevent them.

Clogged inlet valves

If you use your toilet a lot, you might notice that the water takes longer to flow out than before. You may also notice that the water looks dirty and you have to flush it multiple times until it gets clear again. This is because the water is not flowing out quickly enough, so it has to go through the inlet valve several times. In some cases, the water may even get stuck in the valve and you have to flush it manually.

The solution to this issue includes using clean and soft water respectively. The best way to do this is to run your faucet for at least five minutes before you use it to flush the toilet. Another option is to use a water softener.

The buildup of minerals in the water supply is something that everyone needs to be aware of. You can use a water softener to keep your water clean and to prevent the buildup of minerals that can be hard on the body.

Poor toilet location

In order to make sure that the toilet works well, it is very important to know the type of toilet you have. Knowing the type of toilet you have will allow you to know if the water is enough for it to flush well or not. Knowing the type of toilet you have is also important because it will help you decide how to fix the problem.

There is no simple solution to this problem, however, the best way to solve it is by installing tanks on the affected floors. The tanks can be either an individual tank or a group of tanks. The tanks will increase the volume of the affected toilet, and thus increase its flushing power.

If the toilet is not flushing properly, increasing the size of the tank will give it more power for flushing.

Poorly-sized pipes

Pipes are often too small, especially those that have been used for years. If this is the case, then the water will swirl around in the pipes and will take a long time to drain out.

Plumbing can be a daunting task for many people, even for those who have done some plumbing work before. If you have never done any plumbing work before, it can be difficult to know where to start.

The pipes are the most important component of your home’s plumbing system, and the size of the pipes determine how much water a faucet can deliver. Pipes should be sized properly for each fixture, such as a sink or toilet.

If you are having trouble with your water supply or need to replace the plumbing in your home, it is important to work with a professional. You may need to call a plumber to install the new pipes, and if this is the case you will need to make sure to find a qualified one who can do the job properly and quickly.

Poor venting

There are a lot of different types of toilets available in the market. A common toilet is a gravity-fed toilet, where the water is released from the tank through a pipe. However, a pressure-assisted toilet is also available which has a pump that is used to assist in the flow of the water. The toilet can be installed in a bathroom or in the basement.

Venting toilets is not a new concept. It is something that should be done on all toilets.

Venting a toilet is not difficult but it does require some skill. An expert plumber would be able to tell you exactly what you need to do and how to do it. If you are venting your toilet yourself, make sure that you are safe and follow all of the safety instructions.

Malfunctioning flapper

The flapper is one of the two main components of a toilet. It’s important for both the functionality of the toilet and the safety of its users. If the flapper malfunctions, it may cause problems with the water supply of your home, which may lead to mold, mildew, and damage to the structure.

In order to have a reliable water supply, your toilet needs a working flapper. If your flapper isn’t working correctly, it can limit the amount of water that reaches the toilet bowl. The flapper is usually made of rubber and may become damaged due to age, wear and tear or poor maintenance. If the flapper has been damaged, it may not be able to close properly and allow water to flow into the toilet bowl.

If the chain is stuck, you should unentangle it to restore normal functioning. A damaged or faulty flapper only needs to be replaced with a good one. The procedure for replacing a flapper is as follows: Remove the tank cover. Unscrew the bolts that hold the tank in place. Pull the tank from the bowl. Remove the flapper. Replace the flapper with a new one. Replace the tank cover.


In conclusion, the cause of toilet swirls is a combination of several factors. The most common one is an unbalanced amount of water and/or too much soap in the bowl. Other causes include: dirty pipes, hard water, clogged drains, old plumbing, and low water pressure. This is a common cause of toilet swirls but won’t flush. If you notice a toilet that has a high water level, you may notice that the water will start to swirl when you flush. This is a common cause of toilet swirls but won’t flush.


1. What is a toilet swirl?

Toilet swirls are caused by air bubbles that form in the water in the bowl of the toilet. This happens when there is not enough water in the tank to keep the toilet bowl clean. When the water level drops, the air can become trapped in the bowl and creates the swirls.

2. Why do toilet swirls happen?

Toilet swirls happen because there is not enough water in the tank. It’s important to fill your tank to the recommended level so that it can hold enough water for your toilet to flush properly. If you don’t have enough water in the tank, your toilet will not be able to keep the bowl clean.

3. What causes a toilet to stop flushing?

A toilet that doesn’t work can be caused by a number of things. The first thing to check is if the float is still in the tank. If the float isn’t there, you may have a broken or clogged pipe. Another common cause of a toilet that won’t work is that the toilet tank is empty or low on water.

4. How do I fix a toilet that won’t flush?

Toilets that won’t flush can be fixed with a plunger. The plunger is used to push the air out of the toilet.

5. How can I tell if my toilet has a problem?

If you have a toilet that won’t flush, check to make sure that the float is still in the tank. If it’s not there, you may have a broken or clogged pipe. If you can see bubbles coming from the pipe, you may have a leak. If you can see bubbles coming from the tank, there may be an air pocket in the tank.

6. How do I know if my toilet is low on water?

Toilet water level is usually measured by the watermark on the bottom of the tank. If the watermark is low, your toilet will not be able to keep the bowl clean.

7. What should I do if my toilet won’t stop running?

If your toilet won’t stop running, try flushing it again and then again. If it still won’t stop running, call a plumber.

Leave a Comment