How to Unclog a Toilet with a Wire Coat Hanger

 How to Unclog a Toilet with a Wire Coat Hanger

 Discover a simple, easy, and cheap way to unclog your toilet.

The average person will spend about 10 years of their life trying to figure out how to unclog a toilet. This is a major inconvenience. And it’s not just one toilet—it could be any toilet in your house, or maybe even in your business. It’s a very frustrating problem to deal with, especially if you don’t know how to fix it. Fortunately, there’s a simple solution. All you need is a wire coat hanger and a few household items.

 I am going to discuss How to Unclog a Toilet with a Wire Coat Hanger

How to Unclog a Toilet with a Wire Coat Hanger

Steps

Supplies Needed

How Effective is the Wire Method?

Further Reading on Unclogging Toilets

Tampon Clogged Toilet – How to Fix It

How to Unclog a Toilet with a Wire Coat Hanger

You can use a coat hanger to clear a clogged drain. It’s a great option because it’s less expensive than buying a snake, and it doesn’t require any tools. All you need is a coat hanger, some pliers, and a container to catch the water.

I have used this method for years with great success. It is a very simple and effective way to get rid of clogs in the toilet without spending a lot of money on expensive tools.

I am a fan of anything that works, and I’ve found that this method works well.

You can also use toilet paper to remove the clogs from the toilet, but it’s not as effective as the hanger.

You may be thinking, “What’s the big deal about a coat hanger?” Well, I’ll tell you. When I was a kid, I used a coat hanger to hang up my wet clothes. However, as I got older, I began using a plastic coat hanger to hang up my wet clothes.

Steps

Before we start, note that you can only use a wire coat hanger rather than plastic or wood because they can’t be unwound, nor will they be effective in the job.

Supplies Needed

• Wire hanger
• Rubber gloves
• Rugs
• Duct tape
• Bucket
• Household bleach
• Disinfectant

1. Start by unzipping the bag at the top. Where the two ends were round together, take one side and open it up, then follow with the other. You’re looking to get one long piece of wire. When you hook it into the hanger, don’t leave the hooked end. Use a plastic hanger to hold the rug. The small piece of the rug should be pulled into the hooked part of the hanger. This is to prevent you from scratching your porcelain. Secure the toilet door handle. Or else, your toilet will remain stuck in the toilet bowl and cause a big clog. Try and move and twist the drain pipe to dislodge the clog. Keep flushing the toilet and you will see more and more of the water drain out of the toilet bowl. Clogs in the toilet are common and usually easy to resolve. Flush the toilet to release any blockage.

Tip:

I’d like to recommend this method, which works even better if you use a washing deter

Just put the detergent into the bowl, and leave it sitting for about 30 minutes.

Follow the directions above to Step Six then pour the hot water into the bowl.

Shower to make sure the clog is resolved.

Supplies Needed

When it comes to cleaning out the pipes, there are several different methods. However, the easiest way to clean out the pipes is to use a washing detergent and hot water. Simply add the detergent into the bowl and let it sit for about 30 minutes. Follow the instructions above to step six then pour the hot water into the bowl. Flush to make sure the clog is resolved.

How Effective is the Wire Method?

The wire method is the most common method of unclogging a drain, but it is not always the best solution.

A lot of people worry about damaging the pipes in their home. That is understandable because if you do damage them, you could be in for a lot of trouble. However, there are many things you can do to protect your pipes from being damaged, including using a toilet plunger that is specifically designed for this purpose. This plunger will help you get the wire out of the toilet without damaging the pipe.

 Conclusion

If you’ve ever had to unclog a toilet with a wire coat hanger, you know how frustrating it can be. The hangers are usually too short and the toilet is too high. It’s a messy, time-consuming process, and you probably don’t want to try it again for a long time. But if you’re anything like me, you’ll be doing it again and again.

Clogged toilets are a common problem that can be quite frustrating. Fortunately, you don’t need to pay a plumber to unclog your toilet. In fact, you can use a wire coat hanger to unclog your toilet. The key is to use the right tool for the job.

 FAQs

1. What is the best way to unclog a toilet?

The best way to unclog a toilet is to use a plunger. You can also use a wire coat hanger, but it is not recommended.

2. Why should I not use a wire coat hanger?

A wire coat hanger can break, which can cause serious injury.

3. Why should I use a plunger instead of a wire coat hanger?

A plunger works better than a wire coat hanger.

4. How long does it take to unclog a toilet?

It takes only about 30 seconds.

5. What if my toilet is clogged for a long time?

If you don’t unclog your toilet for a long time, you can get a backup.

6. What if I can’t find a plunger?

If you can’t find a plunger, you can use a plastic bag and put it in the toilet.