How to Remove Shower Drain Cover

 How to Remove Shower Drain Cover

 If you’ve ever tried to remove a shower drain cover yourself, you know it’s a pain in the butt.

The shower drain cover is an essential component of any shower, and it can be a real pain to remove. It’s usually stuck in place with a small rubber plug. The shower drain cover is usually made of plastic, and the rubber plug can be removed with a pair of pliers. However, the rubber plug can become stuck in the drain, and it may take several attempts to get it out. If the rubber plug becomes stuck in the drain, it will be difficult to remove. In this article, we’ll show you how to remove the shower drain cover.

 I am going to discuss about How to Remove Shower Drain Cover

Assemble the Necessary Tools

How to Remove a Screw in Shower Drain Cover

How to Remove a Snap-on Shower Drain Cover



Pop Up


Lift-and -Turn

How to Remove a Shower Drain

Safety Measures and Tips

Assemble the Necessary Tools

You’ll be able to identify the type of shower drain cover after learning about this type of shower drain.

You need these tools and materials to assemble: A flat head screwdriver A trash can A resealable bag A washcloth A utility knife A spray lubricant A pair of gloves Needle nose pliers for use on a snap-on drain cover.

Some shower drains are installed with more than one drain cover. This could vary depending on your home’s plumbing system.

How to Remove a Screw in Shower Drain Cover

This is the regular shower drain cover; it is flat or relatively concave and is never convex. This is the easiest shower drain cover to remove. If you look like it resembles a tea strainer, then this is the shower drain cover to attach the shower head, the first thing you’ll need to do is drill a small hole in the shower tray and then attach the shower head while wearing a pair of gloves, loosen the screws first using the screwdriver. With the palm of your hand, apply pressure to the top end of the screwdriver. Using your other hand, twist the handle of the screwdriver. Rotate it anticlockwise until the screws come off.

You’ll need a lot of lubricants if you have trouble inserting the cartridge into the lip of the case. Don’t wait until the night of the party to practice your dancing skills. Set all the screws aside in a resealable bag or cup. Insert the screwdriver into the metal piece of the cover. Pull the blade of the screw out gently but firmly.

Sometimes it’s difficult to separate the cover from the rest of the cover. If that happens, it might be possible to use a hammer to help. Push hard, but avoid bending or breaking any pipes. Snoop it away with the use of a screwdriver. Screwdrivers make for the perfect tool to fix a blocked drain. Cover the drain gate with a clean, soft cloth when you remove or replace screws. 

How to Remove a Snap-on Shower Drain Cover

You start by lubricating the shower drain cover while wearing gloves. Let the lubricant sit for about two minutes so that it’s ready to use. Take the pair of needle-nose pliers and look for any opening in the drain cover and insert it via the whole. When you install garbage disposal make sure the pointed end faces the opposite side of the drain. Firmly grasp the pliers with one hand per grip and twist them counterclockwise. The more you press on, the sooner the adhesive will become free.There are two ways you can fix the cover if it doesn’t loosen or come off. One is to add more lubricant to speed things up.Once the cover is removed, remove any debris in the shower drain pipe. Do not forget to wash your face thoroughly after cleansing, whether you are using a bar or liquid soap. Clean away any corrosion around the rim of the shower drain. There are many types of shower drain covers and how to remove them.


You don’t need any special tools for this type of shower drain cover.

This is a simple one-piece cover. All you have to do is open the cover, put the drain in the base, and draw


This is a shower drain that opens and shuts when you push off a toe.

Though it may seem complex and challenging to remove at a glance, which is the opposite.

Open the book, then turn it over, and then turn it in anticlockwise to open it up.

Pop Up

Unlike the flip-it shower drain cover, this one does not require any tools to remove it.

Pull it straight up; if it’s still stuck, try removing it while wiggling it.

There are many different options for the roller-ball, including the rocking-arm and flip-up styles.

In order to remove the drain cover, you’ll need to pull horizontally.


Firmly holding the stopper body in place and screw the top knob clockwise using pliers and a rubber grip to prevent scratching.

To remove the stopper, you first unscrew the brass insert beneath. Then lift the stopper.

Lift-and -Turn

It is sometimes confused with the Push/Pull shower drain cover. While it is in the open position, lift and look for a set screw.

If there’s no screw, turn it anti-clockwise to remove it.

When you see a small set of screws, then twist it with a flat head to loosen it so that it won’t be stuck anymore.

How to Remove a Shower Drain

In order to replace or repair the shower drain, the first thing you’ll need to do is remove the shower drain cover.

When you are first starting out, you should not worry. You do not need a professional.

With the right tools, products, and guides, it’s simple enough to lubricate your drains.

Apply a generous amount of lubricant on your shower drain. If your drain is old and rusty, it will have a more challenging time coming off after being unscrewed than a new one.

A couple days before you schedule your appointment, see if there are any clogs in your drains. If you do, make sure to schedule a service appointment to have them fixed.

If you’re having a serious clog in your drain, then try to remove the clog from your drain. Otherwise, you may end up having an emergency plumbing repair.

  1. Shower drains that are attached with or without screws. Be sure to check the battery compartment, and make sure it’s attached. After you do that, be sure to get out of the way. To install the drain you’ll first need to make sure you have the proper tools. You’ll need a pair of pliers to insert the stoppers in the openings on the bottom of the tub. Use the pliers gently and carefully to avoid accidentally denting your drain. Remove each plier and twist it out clockwise. It’s better to give this one a rest for a while, then try it again later when you are less likely to be frustrated by the task at hand. This is a bit tricky. You’re going to need a plastic brush to get the last of the drain out. Check the air filter after you get it running so you can see how much dirt is in there. If it’s dirty, change it. If the damage is too severe to fix, it may be necessary to call a plumber or to replace the pipe.package

Safety Measures and Tips

Taking precautions is important, as your safety is most important.

Make sure you follow these guidelines to keep yourself and your business safe:

Do your research.

Check all local building and plumbing codes before starting any plumbing project.

If you’re just starting out as a seller, you may be able to do everything yourself without paying for any outside help

Obtaining a permit whenever required is always a good idea.

Shut off the water.

If you’re working with water, always turn the water off to be safe, as your tap holds back a lot of pressurized water.

Wear safety gear.

  • Don’t wear safety goggles, ear protection, or hard hats when working around electricity. Make sure to always protect your eyes, use safety glasses when working, or you could get seriously injured. Watch out for contaminants getting into your eyes when working with something that could damage your eyesight. Protects your hands, and avoid exposing skin. While you work, you come into contact with a lot of chemicals and different types of materials that can harm or irritate your skin. If you work with chemicals in your office, it’s best to protect your lungs from any toxins that are in the air by using a disposable face

Practice tool safety.

When working with power tools, always use the manufacturer’s guides to ensure proper safety.

When working with heat you must always have a heat shield in place.

Read labels.

Having all the products labeled helps you to avoid confusion and makes it easy to find the products you need when you’re working.

Always check for the recommendation for use. Check for any warnings or precautions to be taken.

Never ignore the smell of gas.

If you see any sign of a natural gas leak, stop at once and turn off the gas or call your gas company.

You should not attempt to find or fix the gas leak yourself.

Always use a drain lubricant.

Lubricating a drain is different than greasing or oiling a drain as lubricants can clog the drain instead of loosening it out the threads.

With these tips and safety precautions, we hope that you can remove a shower drain cover safely and easily.


In conclusion, To remove shower drain cover, you must first determine whether the shower drain cover is loose or fixed. If it is fixed, then you need to find the appropriate tool to loosen it. If it is loose, then you need to find the appropriate tool to tighten it.


1. How to remove shower drain cover?

There are a number of ways to remove shower drain covers. The first way is to unscrew the drain cover from the pipe. The second way is to use a wrench to loosen the drain cover.

2. How to replace shower drain cover?

Once you have removed the drain cover, you can replace it with a new one.

3. How to install shower drain cover?

The first thing you will need to do is to measure the space between the drain and the wall. Then, you will need to put a new piece of plastic over the drain.

4. How to fix shower drain cover that doesn’t seal?

You will need to take off the drain cover and make sure that there are no cracks or leaks.

Leave a Comment