How to Fix a Toilet That’s Been Damaged by a Plumber or a Plumbing Company?
With This Step-By-Step Guide, You’ll Be Able To How to Remove a Toilet Seat-Hidden Fixings, Metal Hinges & No Screws
If you’re in the market for a new toilet seat but aren’t sure where to start, then this post is for you. The toilet seat is one of the most important parts of your bathroom, so it should be a priority to get it replaced if it’s starting to wear out. But what happens if you don’t know how to remove the toilet seat? Or worse, what if you can’t find the seat? Don’t worry, we’ve got you covered. This post will walk you through the process of removing a toilet seat that has been replaced with a plastic one, and how to remove it without having to use any tools.
I am going to discuss How to Remove a Toilet Seat-Hidden Fixings, Metal Hinges & No Screws
How to Remove a Toilet Seat-Hidden Fixings, Metal Hinges & No Screws
Basic Seat Removal Steps for Common Toilets
Supplies and Tools Needed
Method
Removing Seat with Hidden Fixings
Materials and Tools Needed
Method
Removing Seat with Metal Hinges
Removing Seat with No Screws
How to Remove a Toilet Seat-Hidden Fixings, Metal Hinges & No Screws
This Article shows how to remove the toilet seat with a few simple steps. There are a few different ways to remove the toilet seat, but this method uses a toilet seat wrench. The toilet seat wrench is made of sturdy metal, making it easier to use. The toilet seat wrench is held in place by a rubber band, and the rubber band is removed. Once the rubber band is removed, the toilet seat can be easily removed.
To remove the toilet seat, start by locating where the seat is joined with the toilet. If you can’t spot any bolts or screws on top of the seat, check underneath. You should see the ends of a screw or a mounting nut. Use a wrench, screwdriver, or locking pliers to unscrew the seat off.
There are many brands of toilets and they come with different designs and features. Depending on the brand, you may find that the bolts are made from metal or plastic. Some have bolts that you can remove without tools, but most have bolts that require a tool to remove. For the ones that require a tool, you will need a wrench to remove the bolts.
Basic Seat Removal Steps for Common Toilets
The seats of a motorcycle are attached differently so the main guideline is this: – Attach the seat post to the rear wheel before attaching the backrest.
Removing Seat with Hidden Fixings
Materials and Tools Needed
- Protective hand gloves
- Penetrating oil
- Drill with bits
- Hacksaw
- Masking or duct tape
- Putty knife
- Socket wrench
- Pliers
- Flathead Screwdriver
Method
Modern toilets come with hidden fixing because people don’t want to see bolts on their toilets.
Look at the bottom of the toilet and check underneath to make sure that there are not any screws.
Again, you could be dealing with metal or plastic screws. Put on your gloves, and start looking for the backs of the screws.
See the top section of the toilet to remove the caps or whatever is covering the bolts.
- To loosen the seat, turn it clockwise. It’s wise to keep exerting a little pressure until the nut loosens. If the nut doesn’t loosen, then you need to use a penetrating oil or WD40 to lubricate both bolts. The penetrating oil is a great choice for rusted bolts and nuts. Wait about five to ten minutes after applying the oil before working on any tight spots. If the bolt is rusted really badly, try to remove it by mixing vegetable oil and acetone. The acetone will loosen the grip, and then you can use a screwdriver to open the bolt. To make sure there aren’t any loose nuts under the seat, begin to work the nut towards you by hand. If you have a pair of pliers, you can use them to keep the bolt steady, as you remove the nut. It will be a total loss if all these efforts are futile. You should bring in a hacksaw and cut the bolts off. Cover the porcelain around the head of the bolt with your knife so you don’t accidentally damage it.
- Secure the toilet with duct tape or masking so that you don’t hack through anything else on the toilet Cut the bolt and the hinges off the toilet seat. It’s a good idea to use a set of pliers to drill the bolts out of the wall, but if they’re too tight, a thin drill with a thickness of about 1/16 inch will be your best bet. Start drilling just above the top of the nut and you’ll have to use steady pressure to break the bolt and nut. Don’t drill with too much energy, or else you could damage the material.
Removing Seat with Metal Hinges
Metal bolts are easier to unscrew than wooden ones if they’re threaded all the way through.
But metal hinges have one drawback, they tend to rust.
Pliers will not be able to unscrew the bolts.
You could use a socket wrench to get a deeper, firmer grip on the metal hinges then unwind the wing nut underneath the toilet.
The socket should be about half an inch wide so it can fit over the bolts easily.
When the door doesn’t close all the way, you could try using a lubricant to loosen up the nut that holds the hinges.
Make sure that the nut doesn’t turn into a “nut ball” by using penetrating oil or WD40.
To open the bolt, let the oil seep into the bolt, lubricate it, and then try opening the bolt again.
It may mean the rust is too deep and the oil could not help.
Your last option is to drill holes through the metal hinges of your door. There are two things you could do: use a drill or break through the metal hinges with a hacksaw.
The drill will break the metal hinge by exerting a lot of force.
A propane torch is a must for anyone doing any type of metalworking projects. It makes breaking the bolts down and removing them much easier.
You’ll know if the oven is hot because it will be too hot to touch. When it’s off, turn it on low, set the timer for 15 minutes and check it every 5 minutes.
Safety is important for both of these options so wear protective glasses, gloves, and duct tape over any open area of your toilet.
This process can be hard to do, so you may want to hire someone to help.
Conclusion
In conclusion, a toilet seat hinge is a very common problem that most people face. They are used to replace the old-style hinges that were screwed into the wall. However, these hinges are very difficult to remove. This is because they have a metal strip that goes through the hole in the wall and then comes back out again. This metal strip gets in the way when you try to unscrew the hinge from the wall. This is why most people struggle to remove them.
FAQs
1. What’s the best way to remove a toilet seat?
There are two ways to remove a toilet seat. The first is to use a plunger. You can use a plunger to get the toilet seat off of the toilet bowl. The second way is to use a toilet seat puller. This is a tool that has a hook on one end that attaches to the underside of the toilet seat and another hook on the other end that attaches to the toilet seat. When you pull the tool, the toilet seat comes up and out.
2. What’s the difference between a toilet seat and a toilet lid?
A toilet lid is a cover that goes over the top of the toilet bowl. A toilet seat is a flat piece of plastic that goes under the toilet bowl.
3. How do I remove a toilet seat with no screws or hidden fixings?
The toilet seat has no screws or hidden fixings. You can remove the toilet seat with a toilet seat puller.
4. How do I remove a toilet seat with no screws or hidden fixings?
You can remove the toilet seat with a toilet seat puller.
5. How do I replace a toilet seat with no screws or hidden fixings?
You can replace a toilet seat with a toilet seat puller.
6. What is the best way to remove a toilet seat with no screws or hidden fixings?
The best way to remove a toilet seat with no screws or hidden fixings is to use a toilet seat puller.