How to Clean Shower Door Tracks

 How to Clean Shower Door Tracks – Easy and Fast!

 Step by Step Instructions on How to Clean Shower Door Tracks

As you can see, there are many different types of shower doors. Some of them have a glass panel, some have a sliding door, and others have a shower curtain. Each type has its own set of advantages and disadvantages. What’s more, each type of shower door has its own way of cleaning it. Now that you know all this, you may be wondering how you can clean your shower door. Well, you’ve come to the right place!

 I am going to discuss How to Clean Shower Door Tracks

How to Clean Shower Door Tracks

Using Vinegar

Using Lemon Juice

Baking Soda


Commercial Cleaners


Using a Mold Remover

Tips to keep the shower doors clean

How to Clean Shower Door Tracks

If you want to learn how to clean shower door tracks, you will need to first learn how to clean a bathroom door track.

For those who are new to using cleaning products, there are many different types of cleaners available in the market. These range from simple to complex, depending on what the cleaning product is used for. It is important to choose the right cleaner based on the surfaces you want to clean, whether it is glass or vinyl.

Using Vinegar

To clean the aluminum shower door tracks, simply add vinegar to a spray bottle and spray the tracks. Allow the vinegar to work for about 5 minutes. Rinse with water and wipe off the tracks with a damp cloth.

Items needed

  • White vinegar
  • Spray bottle
  • Old toothbrush
  • Cloth
  • Sponge/ magic eraser


Use a spray bottle to spray your shoes on the treadmill. Try to avoid getting any of the liquid on the ground or the belt.

Let the vinegar sit on the track for about 10-30 seconds. Use an old brush to scrub the track, getting rid of soap scum and grime.

Remove the pesky stains that will not come out no matter how hard you try. It’s best to use a sponge to wipe the marks off the tile.

Cleaning the shower is often the hardest part of the whole process. You may need to repeat the whole cleaning process if your shower isn’t clean enough.

Using Lemon Juice

I am often asked, “what is the best cleaning agent for the shower door tracks?” There are several different types of cleaning agents you can use, but my preferred choice is to use lemon juice. I recommend that you add some salt to the lemon juice, which will help prevent mold from growing. You can also use this method to clean the shower door frames.


  • Salt
  • Cloth
  • Lemon or lemon juice
  • Toothbrush


Cut the lemon into four pieces. Dip the first piece in salt and then dip the next three in lemon juice.

Rubbing lemon juice all over the car’s tracks will help get rid of gum and mildew, as well as make them look new again.

You can clean your bicycle by putting a wet cloth over the track.

Using the toothbrush, apply the paste to the door tracks.

Baking Soda

You can find baking soda at most grocery stores and drug stores. You can also find it online. I use a product called Borax which has sodium borate in it. It’s very effective and safe for most surfaces. Use this product instead of baking soda if you have sensitive skin.


  • Baking soda
  • Toothbrush
  • Water
  • Bowl
  • Microfiber cloth


Make a paste by mixing water and baking soda in a bowl.

Use the brush, dip it in the paste, and scrub the track.

If the grime is stubborn, use a microfiber cloth to apply the paste, and then let it sit for about an hour.

If you want to restore the shine to your carpet, then the best thing to use to do it is a vacuum cleaner.

Wipe down the track with an old rag.


Hydrogen peroxide is not as harsh as bleach is, thus it is suitable for cleaning.


  • Hydrogen peroxide
  • Toothbrush
  • Cloth
  • Spray bottle
  • Dish soap (Dawn)


You’ll need a few drops of hydrogen peroxide and a spritzer to clean your countertops.

Spray the mixture on the door tracks and allow it to set for 5-10 minutes.

A used toothbrush can be used to clean off grime and soap scum.

Dip the cloth in water and wipe all the Dawn away because it can be slippery.

Commercial Cleaners

When it comes to cleaning your shower tracks, there are many different products that work well, but some are better than others. You can use a commercial cleaner to clean mildew, soap scum and grime from your tracks. You’ll need to buy some commercial cleaner, such as Quick Glo, and follow the directions on the package. Be sure to clean your shower track after you shower!

Items needed

  • Old toothbrush
  • Gloves
  • Clean spray bottle
  • Magic eraser
  • Cleaner
  • Sponges
  • Rags

Procedure to use a commercial cleaner

Some ingredients in cosmetics are harsh and can cause harm to your skin, therefore it is important that you put on gloves to protect your skin.

Pour the cleaner into a spray bottle and spray the cleaner on the door tracks.

Leave the cleaner to sit for the time stated on the cleaner’s instructions.

This prevents soap scum and mildew from becoming stuck in your toilet tank and allows it to be easily removed when it’s time for your next cleaning.

Use an old toothbrush to scrub away the soap scum and mildew, until the track is completely clean.

Rinse the track with water and dry it with a dry towel.


Steamers used for cleaning clothes or even the floors can also be used to clean the shower door tracks.

Materials needed

  • Toothbrush
  • Steamer with wand 
  • Cloth
  • Plastic putty knife

Steps to clean a door track using a steamer

Make sure to read the instructions first, so you know how to use the steam cleaner effectively.

Run the steamer over the track. Then clean up the mess.

After using a product with your toothbrush, apply the solution to the stain.

Repeat the whole process to make sure that the tracks are as clean as possible.

Using a Mold Remover

It’s a simple process that only takes a short time and uses simple materials.

Items needed

  • Sponge
  • Mold remover
  • Paper towels
  • Bucket of water


Clean your shower door by spraying mold remover in the track that your shower door slides through.

Clean the mold using the sponge. Rinse the sponge in water and use it to wipe off the mold remover from the door track.

You’ll want to put the wet towel away, so you don’t forget.

Tips to keep the shower doors clean

If your shower door tracks are already clean, you don’t need to wipe them with a rag. Simply wipe them down with an all-purpose cleaner, and they should stay clean.

This is easy because it only takes a few minutes and works well in fighting against mildew.

When the shower doors aren’t well-maintained, they can cause problems in sliding smoothly. Daily cleaning ensures the sliding doors continue to glide easily.

Was the caulking properly sealed? If it wasn’t, then it may be time to make a call about a new roof.

1.There are three reasons why you should add notches to the track:

2. It discourages the growth of mildew.

3. It prevents wheel slips and damage to the rail

You should run a bar of paraffin over the track after you clean it.

This is important to help the door track to resist dirt and damage.

Look into heavy-duty glass doors with fewer tracks, compared to conventional doors.

This means you’ll get less dust in the tracks, which can translate into minimal cleanings. Remember that nothing lasts forever.

Replace your shower doors if they’re looking a little outdated.


In conclusion, it is a very common problem to have a shower door that is difficult to open and close. A lot of people think that they need to replace the whole shower door, but this is not the case. If you are having trouble opening or closing your shower door, you can fix it easily. There are many things that you can do to help you open and close your shower door smoothly. This article will help you with that. the first step in cleaning the shower door tracks is to remove all the soap scum and grime that has accumulated over time. The next step is to clean the shower door track with the help of a soft, non-abrasive sponge or rag. Finally, use a glass cleaner to polish the glass surface.


1. How do I clean shower door tracks?

To clean shower door tracks, use a non-abrasive cleaner and a soft brush. Make sure you clean all of the grooves in the door.

2. How long should I wait before using the shower?

It is recommended that you wait at least two hours after cleaning your shower door tracks.

3. How often should I clean my shower door tracks?

You should clean your shower door tracks once a week.

4. How do I know if my shower door tracks need to be cleaned?

If your shower door tracks are dirty, you may notice that the water is not draining as well as it should.

5. What can I use to clean my shower door tracks?

You can use a non-abrasive cleaner and a soft brush to clean your shower door tracks.

6. What can I do to prevent the buildup of soap scum on my shower door tracks?

To prevent the buildup of soap scum on your shower door tracks, make sure that the soap scum is removed from the shower door tracks.

7. How can I clean my shower door tracks? To clean your shower door tracks, use a non-abrasive cleaner and a soft brush. Make sure that you clean all of the grooves in the door.

Leave a Comment