How to Clean a Toilet Plunger in 4 Easy Ways + Storage Ideas
A Simple Guide To Cleaning Your Toilet Plunger With No Mess, No Cleanup, and No Disposables
The plunger is a staple in most homes and bathrooms. Whether it’s used to remove toilet paper from the bowl or to flush a clog, it’s one of those household items that gets put in the closet and forgotten about until the next time you need it. While a plunger can be a great tool to use for removing debris from your toilet, it can also get pretty gross if you don’t clean it regularly. If you’re not cleaning your plunger on a regular basis, it’s time to take a look at How to Clean a Toilet Plunger in 4 Easy Ways + Storage Ideas
I am going to discuss How to Clean a Toilet Plunger in 4 Easy Ways + Storage Ideas
How to Clean a Toilet Plunger in 4 Easy Ways + Storage Ideas
Method #1 Using apple cider vinegar
Method #2 Using chlorine bleach
Method #3 Using an aerosol disinfectant
Method #4 Using dish soap and scrub brush
How to Dry
Storage Ideas
Is there an Automatic/ self-cleaning plunger?
How to Clean a Toilet Plunger in 4 Easy Ways + Storage Ideas
It’s easy to clean a plunger by soaking it in warm soapy water and scrubbing it off. It’s important to keep the plunger stored away from your toilet. If it’s stored too close to the toilet, the soap will dry out and you won’t be able to clean it properly.
Toilet plungers are not something you want to get sick from, so it’s important to clean them regularly. A plunger can get clogged and cause problems if it isn’t cleaned properly, so it’s important to follow the manufacturer’s instructions for cleaning.
Here are some of the methods you can use to clean your plunger.
Method #1 Using apple cider vinegar
Method #2 Using lemon juice. Lemon juice at 1% citric acid is an excellent disinfectant and will kill off the germs on your toilet plunger in no time. The procedure for this cleaning process is as follows: You need to soak your toilet plunger in a bowl of warm water with lemon juice. The reason for using warm water is to heat up the lemon juice so that it is easier to work with.
Method #2 Using chlorine bleach
Chlorine bleach is a strong cleaning agent that is effective at removing grime from many surfaces. It is safe to use for cleaning any surface including plastic. I recommend using a solution of 1 part chlorine bleach to 4 parts water. To get the most out of the bleach solution, try not to leave it sitting around for too long. This will allow the chlorine to dissipate and the solution to become ineffective
Method #3 Using an aerosol disinfectant
The first thing you need to do is to spray the aerosol disinfectant on the toilet plunger. You should then let it sit for about five minutes. You can check whether the disinfectant has dried or not by seeing if there is no residue left on the plunger. You can then wipe the plunger with a soft cloth or paper towel. This will ensure that your toilet is safe.
Method #4 Using dish soap and scrub brush
First, pour a cup of warm water into a bowl and add one to two tablespoons of dish soap. Then, scrub the plunger with the scrub brush and then rinse it off with warm water.
When the plunger gets clogged with hair or debris, you’ll need to flush it again and again, until it clears. This is the most time-consuming method, but it’s also the most effective. A: I’ve used a plunger in the past, but I always found it a bit of a pain. I’d often have to use a second plunger to get the thing going.
How to Dry
If you don’t want to dry your plunger using a cloth, then try using a towel. Simply take a clean towel and fold it in half so that it becomes a square shape. Put the folded towel on top of the plunger and press down to ensure that it is completely covered. Then, place it in a location that dries out, such as an open window or on top of a radiator.
You can also use a hair dryer on it. However, make sure that the heat is turned off before using the hair dryer on it.
Make sure that the air blowing on the plunger is just warm and not hot. Hot air can melt the rubber on the plunger and char the wooden part.
Storage Ideas
I bought this plunger holder to store my plunger in my craft room. I like how it keeps my plunger safe and away from any moisture and humidity. This is a great tool to have in your craft room because you never know when you will need to use it!
When you have a plunger that is too big for the hole in the toilet tank or too small to hold the water, you can attach a hook to the plunger and hang it on the wall or on the side of the toilet tank. This is also a good way to hang the plunger so that it is easy to grab and use.
It’s not advisable to keep the toilet plunger on the floor as it’ll be hard to keep it dry and free of germs. If you have a section of the bathroom that is well off the ground, you can put the plunger there to keep it dry.
Is there an Automatic/ self-cleaning plunger?
In the case of a plunger, the only way to get rid of the clog is to physically remove it. However, even if you do that, the plunger will need to be cleaned or replaced. In the case of a toilet, you can purchase a plunger with an automatic mechanism. However, this isn’t the same as a plunger that actually cleans itself.
If you have ever had a clogged toilet, you know how frustrating it is to try to clean it. It’s even worse when you’re not sure if your efforts are even going to work. If you’ve ever tried to unclog a toilet with a plunger, you know how hard it can be to get that plunger to stick in the clog.
Conclusion
In conclusion, you should use the plunger for toilet cleaning because it is easier and faster than using any other tools for cleaning the toilet. But if you are not confident about how to clean the toilet, then it is better to call a plumber to do it for you. There are many reasons why people use plungers for cleaning their toilets. One of them is that they can easily get the plunger from the bathroom. If you want to clean the toilet, you can use a plunger to do that. You can use the plunger to clean your toilet bowl and also your toilet pipes.
FAQs
1. How to clean a toilet plunger in 4 easy ways?
To clean a toilet plunger in 4 easy ways, first, you need to remove the rubber gasket from the plunger. Next, you should pour some warm water into the toilet bowl. Then, you can use a sponge to wipe the bowl. You can also use a toothbrush to scrub the bowl.
2. What is the best way to store a plunger?
The best way to store a plunger is to keep it on top of the toilet tank.
3. What is the best way to store a plunger when it’s not in use?
The best way to store a plunger when it’s not in use is to store it in the bathroom cabinet.
4. How do I store my plunger?
To store your plunger, you should keep it on top of the toilet tank.